2017 Pride, Quantum Q6 Edge2 Wheelchair; Power Tilt, Recline & Leg Extend

Description

>>>>>>>>>>>>>>>>>>>>
This sale is for a .......
2017 Pride, Quantum Q6 Edge2 Wheelchair; Power Tilt, Recline & Leg Extend
This feature packed wheelchair is in good condition; all systems work;  batteries take a charge.
>>>>>>>>>>>>>>>>>>>>
Note:
This item is for
local pickup only
in Stockton, CA. Stockton is 90 miles east of San Francisco and 45 miles south of Sacramento accessible from major highways.
Payment will be made with
USA currency
only
upon pickup.
>>>>>>>>>>>>>>>>>>>>
Note:
I have this item listed locally and I reserve the right to end this eBay auction/sale at any time should the item sell locally during any time frame in which an eBay buyer might place a bid.
In other words this item is subject to availability that might occur due to local sale being made and the item no longer being available.
>>>>>>>>>>>>>>>>>>>>
See all pics and info below for more detail than you will get for any other same item listing on eBay !
Please scroll down through 33 pictures
; text between most pics.
The pictures in this listing are ALL of the actual item being sold.
These 30 plus pics were taken on an overcast day and don't really show the like new quality of this chair. The closeup pictures give a better look at the quality condition.
Quantum Q6 Edge 2.0 Power Wheelchair with Recline + Tilt + Leg Extend.
The charger is included and the batteries are in great shape. This chair is loaded
with options.
>>>>>>>>>>>>>>>>>>>>>>>>>>
Make: Pride Mobility
Model: Quantum Q6 Edge 2.0
Power Tilt
Power Recline
Power Leg Rest extend
Weight Capacity: 300 LBS
Joystick can be mounted on left or right side
Battery Charger is included
This chair has been tested and functions as it should. The batteries have
been
tested and hold a charge.
This is a fully featured chair including the Bluetooth option which has been added to the joystick menu by a service technician.
The folded footrests are in good solid shape; the padded supports behind them in the picture above show no wear.
All fabric and vinyl areas are in excellent condition with NO tears or wear.
The picture above shows one of the variable positions of this chair.
When tilted to this degree the chair will NOT move forward or back. The chair has to be in a more "normal" mode for moving backward or forward.
The drive wheels are in the center of the chair and the 4 wheels forward and rearward provide balance when the chair is in motion and absorb some of the shock of running into rough surfaces when outside.
The thick seat cushion is a Synergy Solution 1.
The cushion measures 18 " wide and 16" deep.
The seat pan can be made wider to accommodate a wider cushion if you choose to replace the cushion shown here.
In the picture above and some of those below you can see the excellent condition of most of the plastic surfaces shown in purple. The very top surface of the plastic shell behind the seat back cushion does have a scratch, but of course it does not affect the operation of the chair.
The Edge 2.0 being sold here is currently available as the Edge 3.0 but not much has really changed. A new (unused) Edge 3.0 starts at around , 000 from retailers.
The power wheels both have a lot of tread on them. The odometer on the joystick screen shows the chair has logged 94 miles since it was built in 2017.
This chair supports a user weight of up to 300 pounds. It is currently configured for a smaller framed person but the seat width can be made wider and the backrest can of course be repositioned too to accommodate the new user.
The seat width is currently set to 16" wide but the seat pan can be adjusted left to right in several inch increments up to I think 20". Those other number are hidden at this point until the seat pan width is adjusted.
There are 4 transport tiedown loops on the four corners of the chair.
The picture above shows the leg rest fully extended by using the joystick.
The picture above shows the chair as fully reclined as I could get it. This is not as flat as I thought it would go, but I may not be using the feature completely. Also, the manual setups done to the chair may have been set to only go the limits as shown above.
If you are new to power wheelchairs you should know that the two motors which drive the chair forward or back can be "in gear" (D for drive) the upper position, or in "free wheel" (N for neutral) the lower position.
The free wheel position is used when the batteries are either dis-charged or when an attendant feels it would be wiser to simply "push" the chair into a desired position.
The motor 'engage' or "free wheel" lever is shown above on the LEFT (motor 1). The right motor (motor 2) is shown in the picture just below with some special notes for it's look and operation.
When I got this chair at an estate sale the black end piece and the yellow handle were not attached to the motor. I asked the seller why that was but they didn't know.
On closer examination I saw that the actual switch moved by the yellow handle needed to be tightened into position, and when I got the chair home I did that and it works properly.
I have the black cap and two bolts to put it on but I am leaving it off to demonstrate the switch positioning to the new buyer. The new buyer can put the cover on or leave the right motor as it is.
The chair cushion measures 18" left to right even though the seat pan is currently set at 16". The seat pan can be adjusted wider (up to 20" I think) if you want to make the seat more comfortable for a larger framed user.
The seat backrest measures 15" tall (from its bottom to its top and can be repositioned on its frame or replace with a different backrest if desired.
The chair is I-Level compatible but that feature is NOT installed on this chair. You would have to buy that feature separately if you wanted to add it to this chair.
The joystick screen shows a variety of information including which "speed profile" is chosen. There are 4 speeds available; I have shown 2 of the four speeds in pictures here.
The odometer on the joystick screen shows the chair has logged 94 miles since it was built in 2017.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The picture above shows the screen when the "home" button has been pressed.
Moving the joystick to one of the four positions shown takes the user to more choices as indicated by the icons on the screen. Several pictures below show some of those choices.
The screen shows the possible seat adjustment functions in colors showing which part of the seat is being adjusted.
>>>>>>>>>>>>>>>>>>>>
The next few pictures show just some of the menu options available for the system.
This chair was manufactured in Feb, 2017 as shown on the motor label in the picture above.
>>>>>>>>>>>>>>>>>>>
Note:
This item is for
local pickup only
in Stockton, CA. Stockton is 90 miles east of San Francisco and 45 miles south of Sacramento accessible from major highways.
Payment will be made with
USA currency
only
upon pickup.
>>>>>>>>>>>>>>>>>>>>
Note:
I have this item listed locally and I reserve the right to end this eBay auction/sale at any time should the item sell locally during any time frame in which an eBay buyer might place a bid.
In other words this item is subject to availability that might occur due to local sale being made and the item no longer being available.
>>>>>>>>>>>>>>>>>>>>
Ordering:
Please be sure to fully read the product description
before ordering
.  Based on the d
escription wording and pictures presented
, please make sure you really do want the item
before you order
.
Please be aware of what I honestly believe are fair descriptive terms - words such as "some", "minor" or "light" (regarding surface wear) that I use might be def
ined differently by
YOU
.
Please look at the photos closely and ask further questions if necessary
before ordering
. I'll be glad to respond via eBay's messaging system, typically within 24 hours.
>>>>>>>>>>>>>>>>>>
Check out my
other items
!
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>