Windmeile Bms for E-Bike Batteries,36V 48V 30A 10S 13S,Batteries Management

Description

Windmeile Bms for E-Bike Batteries,36V 48V 30A 10S 13S,Batteries Management
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
batteries
Engines
display
sensors
Accesories
and much more
Characteristics
The highlights
High quality wind mile
©
Battery management system
Effective protection of the Li-Ion cells
Ebay plus shipping
Lightning-fast shipping within 24 hours
30 days return policy
Excellent customer service - You will receive a professionally sound answer to your question within 2 working days!
Characteristics
wind mile
©
BMS for 36V
or
48V with 30A with on/off cable and cable for single cell connection
Configuration: 36V - 10S, 48V - 13S
Dimensions: 62mm long, 32.4mm wide, 1.6mm high
Material: fiberglass
Resistance: ≤30mΩ
Product description
functionality
The Li-Ion cells of your battery are protected by a battery management system (BMS). This prevents both overcharging and deep discharging. In addition, the BMS ensures a long service life, so that you get the most out of your battery. You can choose between two configurations depending on the voltage of your e-bike system. For 36V batteries, 10 cell groups can be connected in series using an 11-wire cable, for 48V 13 cell groups can be connected using a 13-wire cable. The BMS controls the following processes of your battery: the switching on and off, the charging and discharging process and the internal battery power supply between the individual cell groups in order to create a balance here.
connection
This BMS has 2 connectors and 3 solder points, it runs at 30A and has an internal resistance of 30 ohms. The on/off switch is connected to the BMS at the top right using a two-wire cable. Below you will find the cell group connections, this is where the individual cell groups are connected. The P- solder joint forms the discharge plug to the controller together with B+. The C- solder joint and B+ form the connection for charging the battery, and B- and B+ form the battery power supply. The red wire of the cell connection cable leads to B+.
Efficient
Traceable
Compatible
scope of delivery
BMS in 36V or 48V configuration: 1 pc.
On/off cable: 1 pc.
Cell group connection: 1 pc.
our service
Lightning Faster
Shipment
telephone
support
30 days
refund policy
checked
quality goods
customer opinions
Thats what our customers say:
The employees are very friendly and competent. The shipping was lightning fast and I am also very satisfied with the quality of the products (motor and thumb throttle). Recommended!
Camilla Jesus
Everything delivered quickly and securely packaged. All parts fit together perfectly. Outstanding service. Would buy again anytime.
Matthew Stephan Sommer
The e-bike parts are good and above all they fit together. So far also great support, I have answered all my questions, today unfortunately no longer a matter of course. So far I haven't had to send anything back. Keep it up.
Dirk Henkel
Visit us for more information and guidance
§ Please note that in Germany e-bikes and pedelecs are only permitted on public roads, paths and facilities under certain conditions. Please inform yourself about the current regulations in your country before purchasing.
powered by plentymarkets
The Li-Ion cells of your battery are protected by a battery management system (BMS). This prevents both overcharging and deep discharging. In addition, the BMS ensures a long service life, so that you get the most out of your battery. You can choose between two configurations depending on the voltage of your e-bike system. For 36V batteries, 10 cell groups can be connected in series using an 11-wire cable, for 48V 13 cell groups can be connected using a 13-wire cable. The BMS controls the following processes of your battery: the switching on and off, the charging and discharging process and the internal battery power supply between the individual cell groups in order to create a balance here. This BMS has 2 connectors and 3 solder points, it runs at 30A and has an internal resistance of 30
Marke
windmeile
Akkukapazität
nicht relevant
Batterieart
Li-Ion
Spannung
von Konfiguration abhängig
Kompatibler Fahrradtyp
Universell
Farbe
Silber
Material
Glasfaser
Anzahl der Teile
3
Länge
75mm
Gewicht
20g
Breite
36.6mm
Höhe
12mm
Modell
SDA230
Herstellernummer
nicht zutreffend
Teiletyp
BMS
Kapazität in Wattstunden
nicht relevant
Set enthält
BMS
Set enthält
Zellengruppenkabel
Set enthält
Ein/Ausschalterkabel